110° Regulator Elbow

Enables comfortable, streamlined underarm routing of a regulator hose.

Does your regulator second-stage feel uncomfortable in your mouth when diving? Does it feel like it's trying to pull out of your mouth when you turn your head? If these are problems you have experienced while diving then you may need a hose adaptor that can eliminate this problem. The Sonar 20/70/110-degree Swivel Adaptor makes your primary second stage regulator more comfortable while you dive. The adaptor is installed between your second stage regulator and the regulator low-pressure hose. It allows you to route the hose under your right arm instead of over the shoulder. This adaptor provides a more comfortable feeling and can eliminate the pulling effect of the regulator found with over the shoulder routing.

Okay, so different people refer to this as a 20, 70 or 110-degree adaptor. It just depends on your point of reference when you measure the angle.

This 20/70/110 Degree Angled Swivel Adaptor attached attaches between the regulator second stage and its low-pressure hose routing the hose down the diver's chest and/or under the arm, which eliminates hose push giving you a more comfortable bite on your mouthpiece. Your hose will lay closer to your body (under your arm) helping to eliminate tangles and improve streamlining. Also liked by hookah divers on their regulator whip hose.

This low-profile adaptor is NOT an omni-directional swivel.

Sidemount divers use the 20/70/110 Angle Adaptor to route their hoses down their chest to the bottles eliminating the need to route the hose around the neck.

Some people, including us, prefer this 20/70/110 degree adaptor over the 90 degree adaptor because it angles the hose slightly away from the neck and face.

The 9/16"-18 UNF Male end of this adaptor screws into the standard 9/16"-18 UNF Female fitting on the end of a standard regulator hose.

The 9/16"-18 UNF Female end of this adaptor accepts the standard male 9/16"-18 UNF Male connector on most second stage regulators.